| 以文本方式查看主題 - 曙海教育集團論壇 (http://www.022-oo.cn/bbs/index.asp) -- WinCE系統定制與驅動開發 (http://www.022-oo.cn/bbs/list.asp?boardid=36) ---- 關于VS2005定制WINCE6.0的intel網卡驅動問題 (http://www.022-oo.cn/bbs/dispbbs.asp?boardid=36&id=1810) |
| -- 作者：wangxinxin -- 發布時間：2010-11-26 10:26:40 -- 關于VS2005定制WINCE6.0的intel網卡驅動問題 目前我用VS2005定制intel 8255QM的網卡驅動,但是WINCE啟動后看不到添加的網絡連接 現在我做了以下幾件事 第一我在platform.bib的MODULES中添加了 e100ce6.dll $(_FLATRELEASEDIR)\\e100ce6.dll NK SHK 第二我在platform.reg中添加了 IF CEPB_INTELFE_PCI ;Create registry information for Intel(R) Miniport Driver [HKEY_LOCAL_MACHINE\\Comm\\E100CE6] "DisplayName"="Intel(R) Fast Ethernet Controller" "Group"="NDIS" "ImagePath"="e100ce6.dll" ;Create registry information for template (will be copied to ALL instances of ;adapters using the Intel Miniport Driver) [HKEY_LOCAL_MACHINE\\Drivers\\BuiltIn\\PCI\\Template\\E100CE6] ;PCI Bus Enumeration Information "Class"=dword:02 "SubClass"=dword:00 "ProgIF"=dword:0 "VendorID"=multi_sz:"8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086" "DeviceID"=multi_sz:"1229","2449","1031","1032","1033","1034","1035","1036","1037","1038","1039","103A","103B" "Dll"="NDIS.dll" "Entry"="NdisPCIBusDeviceInit" "Transceiver"=dword:3 "MiniPort"="E100CE6" ;Installable ISR Handler Information "IsrDll"="giisr.dll" "IsrHandler"="ISRHandler" "PortIsIO"=dword:0 "PortOffset"=dword:0 "PortSize"=dword:2 "PortMask"=dword:FF00 ;Settings for DHCP IP Configuration, if enabled IF DHCP [HKEY_LOCAL_MACHINE\\COMM\\PCI\\E100CE61\\Parms\\TcpIp] "EnableDHCP"=dword:1 ; This should be MULTI_SZ "DefaultGateway"="" ; Use zero for broadcast address? (or 255.255.255.255) "UseZeroBroadcast"=dword:0 ; This should be MULTI_SZ, the IP address list "IpAddress"="0.0.0.0" ; This should be MULTI_SZ, the subnet masks for the above IP addresses "Subnetmask"="0.0.0.0" ENDIF ;//DHCP ;Settings for static IP configuration, if enabled IF STATIC_IP [HKEY_LOCAL_MACHINE\\COMM\\PCI\\E100CE61\\Parms\\TcpIp] "EnableDHCP"=dword:0 ; This should be MULTI_SZ "DefaultGateway"="1.2.3.0" ; Use zero for broadcast address? (or 255.255.255.255) "UseZeroBroadcast"=dword:0 ; This should be MULTI_SZ, the IP address list "IpAddress"="1.2.3.4" ; This should be MULTI_SZ, the subnet masks for the above IP addresses "Subnetmask"="255.0.0.0" ENDIF ;//Static IP [HKEY_LOCAL_MACHINE\\Comm\\E100CE6B] "DisplayName"="Intel(R) Fast Ethernet Controller" "Group"="NDIS" "ImagePath"="e100ce6.dll" ;Create registry information for template (will be copied to ALL instances of ;adapters using the Intel Miniport Driver) [HKEY_LOCAL_MACHINE\\Drivers\\BuiltIn\\PCI\\Template\\E100CE6B] ;PCI Bus Enumeration Information "Class"=dword:02 "SubClass"=dword:00 "ProgIF"=dword:0 "VendorID"=multi_sz:"8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086" "DeviceID"=multi_sz:"103C","103D","103E","1050","1051","1052","1053","1054","1055","1056","1057" "Dll"="NDIS.dll" "Entry"="NdisPCIBusDeviceInit" "Transceiver"=dword:3 ;Installable ISR Handler Information "IsrDll"="giisr.dll" "IsrHandler"="ISRHandler" "PortIsIO"=dword:0 "PortOffset"=dword:0 "PortSize"=dword:2 "PortMask"=dword:FF00 ;Settings for DHCP IP Configuration, if enabled IF DHCP [HKEY_LOCAL_MACHINE\\COMM\\PCI\\E100CE6B1\\Parms\\TcpIp] "EnableDHCP"=dword:1 ; This should be MULTI_SZ "DefaultGateway"="" ; Use zero for broadcast address? (or 255.255.255.255) "UseZeroBroadcast"=dword:0 ; This should be MULTI_SZ, the IP address list "IpAddress"="0.0.0.0" ; This should be MULTI_SZ, the subnet masks for the above IP addresses "Subnetmask"="0.0.0.0" ENDIF ;//DHCP ;Settings for static IP configuration, if enabled IF STATIC_IP [HKEY_LOCAL_MACHINE\\COMM\\PCI\\E100CE6B1\\Parms\\TcpIp] "EnableDHCP"=dword:0 ; This should be MULTI_SZ "DefaultGateway"="1.2.3.0" ; Use zero for broadcast address? (or 255.255.255.255) "UseZeroBroadcast"=dword:0 ; This should be MULTI_SZ, the IP address list "IpAddress"="1.2.3.4" ; This should be MULTI_SZ, the subnet masks for the above IP addresses "Subnetmask"="255.0.0.0" ENDIF ;//Static IP [HKEY_LOCAL_MACHINE\\Comm\\E100CE6C] "DisplayName"="Intel(R) Fast Ethernet Controller" "Group"="NDIS" "ImagePath"="e100ce6.dll" [HKEY_LOCAL_MACHINE\\Drivers\\BuiltIn\\PCI\\Template\\E100CE6C] ;PCI Bus Enumeration Information "Class"=dword:02 "SubClass"=dword:00 "ProgIF"=dword:0 "VendorID"=multi_sz:"8086","8086","8086","8086","8086","8086","8086","8086" "DeviceID"=multi_sz:"1064","1065","1066","1067","1068","1069","106A","106B" "Dll"="NDIS.dll" "Entry"="NdisPCIBusDeviceInit" "Transceiver"=dword:3 ;Installable ISR Handler Information "IsrDll"="giisr.dll" "IsrHandler"="ISRHandler" "PortIsIO"=dword:0 "PortOffset"=dword:0 "PortSize"=dword:2 "PortMask"=dword:FF00 ;Settings for DHCP IP Configuration, if enabled IF DHCP [HKEY_LOCAL_MACHINE\\COMM\\PCI\\E100CE6C1\\Parms\\TcpIp] "EnableDHCP"=dword:1 ; This should be MULTI_SZ "DefaultGateway"="" ; Use zero for broadcast address? (or 255.255.255.255) "UseZeroBroadcast"=dword:0 ; This should be MULTI_SZ, the IP address list "IpAddress"="0.0.0.0" ; This should be MULTI_SZ, the subnet masks for the above IP addresses "Subnetmask"="0.0.0.0" ENDIF ;//DHCP ;Settings for static IP configuration, if enabled IF STATIC_IP [HKEY_LOCAL_MACHINE\\COMM\\PCI\\E100CE6C1\\Parms\\TcpIp] "EnableDHCP"=dword:0 ; This should be MULTI_SZ "DefaultGateway"="1.2.3.0" ; Use zero for broadcast address? (or 255.255.255.255) "UseZeroBroadcast"=dword:0 ; This should be MULTI_SZ, the IP address list "IpAddress"="1.2.3.4" ; This should be MULTI_SZ, the subnet masks for the above IP addresses "Subnetmask"="255.0.0.0" ENDIF ;//Static IP ENDIF ;//Intel(R) miniport registry additions. 第三我在項目的環境變量中添加了CEPB_INTELFE_PCI =1 第四我把下載的幾個文件復制到了platform\\cepc\\files的目錄下 第五 以前在5.0會有一個cec文件,但是6.0沒有只有pbcxml,我用vs2005打開cec就報錯,怎么改都不對,所以我也就沒有轉換,添加這個catalog. 但現在問題是在NK.BIN中可以看到網卡的DLL和注冊表的信息，但是OS啟動后看不到這個網卡的連接，希望大家能幫我解決這個問題，謝謝啊 |